News about Creality 3D printers

Fused deposition modeling (FMD) FMD may be the most widely used process at present, and many consumer-grade 3D printers use this process because it is relatively easy to implement. The FMD heating head heats the hot melt material (PLA, ABS, PETG) to a critical state, making it appear semi-fluid. Then the heating head will move along the two-dimensional geometric trajectory confirmed by CAD under...

When 3D printing models, the support is definitely inseparable. If there is no support, those suspended or inclined models will not be printed, so this is also an unavoidable troublesome link. Next, I will talk about this support in detail. 🤔When is a Support Structure Needed? When the model has a suspended or bridge structure, and there is nothing to support underneath, a supporting...

Many products produced by ordinary 3D printers are flawed, and the surface is usually rough. This will not achieve the results you want, and it may also cause some waste of costs. What should we do when we encounter these problems?  Sandpaper Polishing Sandpaper is the most common sanding tool. It should be noted that some water should be added before sanding to prevent...